Aftermarket Parts: Difference between revisions
Wilkie.cole (talk | contribs) |
Wilkie.cole (talk | contribs) |
||
| Line 52: | Line 52: | ||
'''For transversal application''' | '''For transversal application''' | ||
[[File:HEP-UnitedMotorsport Intake Manifold.png|thumb|400x400px|none]] | [[File:HEP-UnitedMotorsport Intake Manifold.png|thumb|400x400px|none]] | ||
=== SPA Performance === | === SPA Performance === | ||
'''For transversal application''' | '''For transversal application''' | ||
Works with hydraulic power steering | |||
[[File:SPA Manifold.png|none|thumb|407x407px]] | |||
[[File: | |||
=== JAAATT Engineering === | === JAAATT Engineering === | ||
'''For transversal application''' | '''For transversal application''' | ||
Revision as of 14:31, 9 February 2024
Valve covers
LPSFAB
JAAAT Engineering
IE Engineering
iAbed
i5garage
Camshafts
Catcams
They offer multiples cam profile setup for hydraulic lifter (stock) or for solid lifter conversion
Valve spring and retainer set
IE Engineering
Supertech
Valves
Ferrea
Ferrea offers standard size and oversized size in super allow or stainless steel.
Solid lifter
Running the stock hydraulic lifters with a shim is fine up to ~8500 rpm. Above that and / or for motorsport application, solid lifters are required.
CasteSystems Performance
Intake manifold
The stock intake manifold is designed to produce low-end torque to the detriment of high end torque, this give better acceleration and fuel economy for the general consumer.
Aftermarket intake manifold with their shorter runner, their bigger plenum and their flow design changes the torque curve allowing for more top-end power while loosing low-end torque.
If you are interested in the science behind runner length, this article is a good start : AutoZine : Intake and Exhaust
IE Engineering
For transversal application
One of the most efficient intake design for top-end power especially on turbo applications.
Althought, it's been reported on newer revisions that the rivet holding the logo plate could be causing small boost leaks.
C2 Motorsport
For transversal application
HEP/UnitedMotorsport
For transversal application
SPA Performance
For transversal application Works with hydraulic power steering
JAAATT Engineering
For transversal application
While it's not an intake manifold, this billet runners give you the possibility to mount a RS3 / TT-RS plenum on a VW 07K
LPSFAB
For longitudinal application
Boost Brothers Garage (nine x engineering)
For longitudinal application (has been designed for Porsche 944)
Phenolic Intake gasket
Limit heat transfer from the cylinder head to the intake manifold. Recommended when using an aftermarket aluminium intake manifold.
LPSFAB
Exhaust flange
LPSFAB
Exhaust manifold
Turbo application
JDL Auto Design
No longer in production
Race3.ca
Designed for longitudinal application
